ULTRACOAT
Couldn't load pickup availability
Wash the car and top up the protection at the same time. Every wash leaves a little more behind.
Ceramic Soap is a concentrated shampoo with a high SiO₂ content, which means every wash leaves protection behind rather than slowly wearing it away.
The effect is cumulative. Gloss builds, water behaviour gets stronger, and the surface stays slick. On a car that already has a coating, it maintains and reinforces what is there. On a car that does not, it builds up hydrophobic protection and self-cleaning behaviour from nothing over a few washes.
It is safe on more than paint. Ceramic coatings, waxes, PPF and vinyl wrap all benefit, and on film it lifts the gloss noticeably and makes it easier to keep clean. Use it on every exterior surface of the car, glass and wheels included.
It is a proper detailing shampoo to use as well. High slickness through the mitt, which is what protects the paint during the contact wash, and a fine, delicate foam. Bubble gum scent.
How it fits into your wash. Pre-wash first, and on a genuinely dirty car do a normal shampoo wash first. Ceramic Soap is the finishing wash, not the heavy lifting.
Bucket, foam gun or pump-up foaming sprayer.
- Adds SiO₂ protection with every wash — cleaning and sealing in one step
- Gloss and beading build up over time
- High slickness protects the paint during the contact wash
- Safe on coatings, waxes, PPF and vinyl wrap
- Works on uncoated paint too, as a shampoo and sealant in one
- Bubble gum scent
How Ceramic Soap performs
Slickness ▰▰▰▰▱ (4.5)
Nothing gets a grip on the surface
Gloss ▰▰▰▰▱ (4.5)
A glassy shine that builds with every wash
Hydrophobicity ▰▰▰▰▱ (4)
Water is repelled almost the moment it lands
UV protection ▰▰▰▰▱ (4)
Real protection from a product you are using anyway
Colour depth ▰▰▰▱▱ (3.5)
Enriches the colour and gives it a richer appearance
Which shampoo do I need?
Shampoo+ washes and strips. Everyday washing at 10 to 15 ml. At 50 ml it strips old wax and sealant, and it is also what you use to service an existing ceramic coating.
Bubble Shock maintains. Acidic, for coated cars and mineral deposits.
Ceramic Soap adds. SiO₂ that boosts protection while you wash.
Available in 500 ml, 1 litre and 5 litres. Technical support available.
Application Guide
Pre-wash. Master Pre-Wash or active foam first. Heavy soiling gets a standard shampoo wash before this stage.
Bucket. 50 ml into 5 litres of warm water, which is 1:100.
Foam gun. 50 ml into 450 ml, which is 1:10.
Wash. Spread with a clean mitt or apply through the foam gun, panel by panel.
Dwell. Leave it 30 seconds, then rinse the whole car thoroughly.
Dry. Dry with a towel or compressed air.
Conditions. Never work in direct sunlight. In warm conditions work on small sections at a time and do not let the product dry on the surface.
Keeping it up. Use it regularly to maintain the hydrophobic effect.
Ceramic Soap turns the final wash stage into a protection stage. On coated vehicles it reinforces the existing layer. On uncoated ones it builds hydrophobic behaviour over repeated washes, which makes it the right shampoo to sell into a maintenance contract.
It also covers your film work. Safe and effective on PPF and vinyl wrap as well as paint, waxes and ceramic coatings, where it lifts gloss and slickness without any risk to the film. One shampoo across every vehicle in the bay.
Where it earns its place: the closing wash on a detail, the standing shampoo on maintenance plans and fleet contracts, and the retail bottle you hand a coating customer alongside Ceramic Q-Detailer. The visible hydrophobic boost is an easy demo at handover.
High slickness through the mitt reduces the mechanical risk on the contact wash, which matters most on the coated vehicles you are responsible for.
Sequencing matters. Ceramic Soap is the finishing wash. Pre-wash with Master Pre-Wash first, and on heavily soiled vehicles run a standard shampoo wash before it. Used as the heavy-lifting shampoo it is expensive and underused.
Where it sits against the others: Ceramic Soap adds SiO₂, Bubble Shock maintains coated vehicles at acidic pH, Shampoo+ washes at 10 to 15 ml and strips or services at 50 ml.
- Active hydrophobic boost — visible beading improvement on every wash
- Ceramic maintenance or standalone sealant — coated or uncoated cars
- Safe on coatings, waxes, PPF and vinyl wrap
- Bucket, foam gun or pump-up foaming sprayer
- The natural retail bottle to pair with Ceramic Q-Detailer at handover
500 ml for the retail shelf. 1 L for studio use. 5 L for monthly or quarterly ceramic maintenance programmes.
Technical Application Notes
Pre-wash. Master Pre-Wash or active foam. Heavy soiling gets a standard shampoo wash first.
Bucket. 50 ml into 5 litres of warm water, 1:100.
Foam gun. 50 ml into 450 ml, 1:10.
Application. Spread with a clean mitt or apply through the foam gun, panel by panel.
Dwell. 30 seconds, then rinse the entire vehicle thoroughly with clean water.
Dry. Towel or compressed air.
Conditions. Never in direct sunlight. In warm conditions work small sections and do not allow the product to dry on the surface.
Compatibility. All ULTRACOAT ceramic coatings, plus waxes, PPF and vinyl wrap.
Support. Technical support available from Ultracoat UK.
Share
Incredible product and very very versatile.